Yamaha DM2000 Manual Do Utilizador
Installing the DM2000
7
DM2000 Version 2—Owner’s Manual
Installing the DM2000
The DM2000 should be placed on a strong and stable surface, somewhere that complies
with the warnings and cautions listed in the previous sections.
with the warnings and cautions listed in the previous sections.
New Functions in DM2000 Version 2
The following functions have been added to the DM2000 as part of the upgrade of the firm-
ware from version 1.2 to version 2.0.
ware from version 1.2 to version 2.0.
Control Surface
•
When you operate the faders (for fader levels) or Encoders (for pan settings), the corre-
sponding fader level or pan setting appears on the channel strip display.
sponding fader level or pan setting appears on the channel strip display.
•
You can switch the indication on the channel strip display between channel name/ID and
port name/ID.
port name/ID.
→ page 276
•
Encoder mode now features an assignable function, ALT LAYER, which enables you to con-
trol the channel level for all 48 channels without switching between layers.
trol the channel level for all 48 channels without switching between layers.
→ page 61
•
There are now 50 assignable Encoder mode parameters.
→ page 63
Input Channels
•
Surround Pan supports 6.1 Surround.
→ page 97
•
You can change the bus assigned to each surround pan channel.
→ page 99
•
The Fader Group Master function enables you to control the overall level of the Fader group
channels simultaneously while maintaining the relative level balance of each channel.
→ page 92
channels simultaneously while maintaining the relative level balance of each channel.
→ page 92
•
The Mute Group Master function enables you to mute all channels in a Mute group simul-
taneously.
taneously.
→ page 90
•
The on/off status of the Follow Pan button is reflected in the pan and Surround Pan settings.
→ page 93
→ page 93
Aux Sends
•
You can exclude channels from Aux Sends (Mix Minus).
→ page 117
•
You can copy the channel fader positions to Aux Sends.
→ page 118
•
You can set all Send levels to nominal simultaneously.
→ page 112
•
If an Aux Send is set to pre-fader, you can set the Pre point before or after the [ON] button.
→ page 112
→ page 112
Common Channel Functions
•
Input and Output Channel Meter pages indicate the gain reduction being applied by the
Gate and Compressor.
Gate and Compressor.
→ page 128
•
You can select whether the Input Channel’s Pan setting is used when the Input Channel Solo
signal is set to Pre Fader.
signal is set to Pre Fader.
→ page 143
•
Raising the channel faders for soloed Channels from –
∞ can unsolo the Channels.
→ page 143
•
The AUX SELECT [AUX 1]–[AUX 12] buttons enable you to solo or unsolo Aux Sends.
→ page 143
→ page 143
•
The Fader Group Master function enables you to control the overall level of the Fader group
channels simultaneously while maintaining the relative level balance of each channel.
→ page 147
channels simultaneously while maintaining the relative level balance of each channel.
→ page 147
•
The Mute Group Master function enables you to mute all channels in a Mute group simul-
taneously.
taneously.
→ page 149