Lanier LD225 Manual Do Utilizador

If Your Machine Does Not Operate As You Want

119

Problem

Causes

Solutions

The main power in-
dicator continues
blinking and does
not turn off when
pressed.

This occurs in the fol-
lowing cases:

• The exposure

glass cover or the
ADF is open.

• The machine is

communicating
with external
equipment.

• The hard disk is

active.

Close the exposure glass cover or ADF, and
check if the machine communicating with a
computer.

Original images are
printed on the re-
verse side of the pa-
per.

You may have load-
ed the paper incor-
rectly.

Load paper correctly. Load paper into Tray 1-4
with the print side up, and into the LCT or by-
pass tray with the print side down. See p.123
“Orientation-Fixed Paper or Two-Sided Paper”.

Misfeeds occur fre-
quently.

The tray's side
guides may not be
locked.

The tray's end guide
may not be set prop-
erly.

You may have load-
ed paper of a size not
shown on the paper
size selector.

When using paper of a size that cannot be de-
tected automatically, use Tray Paper Settings to
set the paper size. See p.56 “Tray Paper Size:
Tray 1–4” and p.162 “Copy Paper”.

An error message re-
mains, even if misfed
paper is removed.

When a misfeed mes-
sage appears, it re-
mains until you open
and close the cover,
as required.

Clear misfed paper, and then open and close the
front cover. See p.127 “x Clearing Misfeeds”.

An error message re-
mains, even if con-
sumables are
replaced and/or mis-
fed paper is re-
moved.

This may occur if the
HDD is not installed.

Press the {Start} key.

Cannot print in du-
plex mode.

You cannot use pa-
per in the bypass tray
for duplex printing.

For duplex printing, select Tray 1-4 in copier
mode or with the printer driver.

[1 Sided Copy]

is se-

lected for Paper
Type: Tray 1-4.

Select [2 Sided Copy] for Paper Type: Tray 1-4. See
p.58 “Paper Type: Tray 1–4”