Sony DA1500ES Manual Do Utilizador
30
US
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U
VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm
VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm
masterpage: Left
STR-DA1500ES
4-129-743-11(1)
4-129-743-11(1)
Enter the frequency of a station directly by
using the numeric buttons.
using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
select the FM or AM band.
You can also use FM/AM on the receiver.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
enter the frequency.
Example 1: FM 102.50 MHz
Select 1
Select 1
b 0 b 2 b 5
Example 2: AM 1,350 kHz
Select 1
Select 1
b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
the direction of the AM loop antenna
(aerial) for optimum reception.
4
Press ENTER or
.
You can also use MEMORY/ENTER on
the receiver.
the receiver.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
(Model of area code UC only)
You can change the AM tuning scale to either
9 kHz or 10 kHz using the buttons on the
receiver.
You can change the AM tuning scale to either
9 kHz or 10 kHz using the buttons on the
receiver.
1
Press ?/1 to turn off the
receiver.
receiver.
2
While holding down FM/AM,
press ?/1.
press ?/1.
3
Change the current AM tuning
scale to 9 kHz (or 10 kHz).
scale to 9 kHz (or 10 kHz).
To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure above.
repeat the procedure above.
Note
All preset stations will be erased when you change
the tuning scale.
the tuning scale.
Tuning into a station directly
(Direct Tuning)
(Direct Tuning)
Changing the AM tuning scale
?/1
FM/AM