Bertazzoni P24 4 00 X Manual Do Utilizador

 

3

 

After having removed the various loose parts from the internal and external packing, make sure that the 
hotplate in not damaged and is suitable for the specific gas usage. The gas type label is on the underside of 
the hotplate base. 
In case of doubt, do not use the appliance and contact skilled personnel. 
Keep all the packing parts (polystyrene foam, cardboard, staples, etc.) away from children. 
Consider the critical dimensions of the appliance, before making an opening in the top surface of the bench 
top. (relative measurements as per Fig 1- 2). 
 
 

fig.1

 

 

fig. 2 

 
 
 

 

The minimum overhead clearances shall be in accordance with the minimum values indicated in the table 
n.1 and are shown and in the fig. 1- 2 
Range hoods and exhaust fans shall be installed in accordance with the manufacturer’s instructions. 
However, in no case shall the clearance between the top of the highest burner of the cooking appliance and 
the range hood be less than 30”( 762mm). See Fig. 1- 2. 
Any other downward facing combustible surface less than 600mm above the top of the highest burner shall 
be protected for the full width and depth of the cooking surface area. 
However, in no case shall this clearance to any surface be less than 17

3/4

”(450mm.) 

Maximum depth for the overheads cabinet is 13” (330mm)