KitchenAid LI3Y7C Manual Do Utilizador

4. Run home power supply wiring through 

¹⁄₂" strain relief into 

terminal box.

5. Use UL listed wire connectors and connect white wires (B) 

together.

6. Use UL listed wire connectors and connect black wires (C) 

together.

7. Connect green (or bare) ground wire from home power supply 

to the 2 yellow-green ground wires (D) in terminal box using 
UL listed wire connectors.

8. Tighten strain relief screw.

9. Install terminal box cover.

10. Reconnect power.

1. When using both upper and lower vent covers, push lower 

cover down onto hood and lift upper cover to ceiling and 
install with 2 - 2.9 x 6.5 mm screws.

NOTE: For vented installations, the upper vent cover may be 
reversed to hide slots.

1. For non-vented (recirculating) installations only, install 

charcoal filters over grille on blower housing. See the “Range 
Hood Care” section.

2. Install metal filters. See the “Range Hood Care” section.

3. Check the operation of the range hood blower and light. See 

the “Range Hood Use” section.

NOTE: To get the most efficient use from your new range hood, 
read the “Range Hood Use” section.

A

B

C

D

E

A

B

C

C

D