Sanyo PLC-ET30L Manual Do Utilizador

Select Digital zoom +. The On-Screen Menu disappears and

“D. zoom +”appears. Press the SELECT button to expand

the image size. Use the Point

ed7 8

buttons to pan the

image. The Panning function can work only when the image

is larger than the screen size.

You can also enter the Digital zoom + mode by pressing the

D.ZOOM button on the remote control.

To exit the Digital zoom +/– mode, press any button except

the D.ZOOM, SELECT, and Point buttons.

To return to the previous screen size, select a screen size

from the Screen Menu or select an input source from the

Input Menu (p.35) again, or adjust the screen size with the

D.ZOOM buttons on the remote control.

Digital zoom +

Select Digital zoom –. The On-Screen Menu disappears and

“D. zoom –” appears. Press the SELECT button to compress

image size.

You can also enter the Digital zoom - mode by pressing the

D.ZOOM button on the remote control.

Digital zoom –

For zooming in and out the images

✔

Note:

• The projector cannot display any

resolution higher than 1600 x 1200. If
your computer’s screen resolution is
higher than that, lower the resolution
before connecting to the projector.

• The image data other than 1400 x 1050

is modified to fit the screen size in
initial mode.

• True, Full screen, and Digital zoom

+/– cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i, or 1080i is
selected in the PC System Menu (p.37).

• The panning function may not be

operated properly if the stored Mode
in the PC Adjust Menu is used (pp.38–
40).

• The minimum compression ratio can

be limited depending on the input
signal or when the Keystone function
is working.

• Digital zoom +/– cannot be selected

when Full screen or True is selected.

• Wide cannot be selected when 720p,

1035i, or 1080i is selected in the PC
System Menu (p.37).

• Digital zoom - cannot be operated

when Custom is selected.

Screen Adjustment