Sanyo PLC-ET30L Manual Do Utilizador

Capture

This function enables you to capture an image being

projected to use it for a starting-up display or interval of

presentations.

Select Capture and press the SELECT button.

A confirmation box appears and select [Yes] to capture the

projected image.

After capturing the projected image, go to the Logo select

function and set it to “User”. Then the captured image will

be displayed the next time you turn on the projector or

when you press the NO SHOW button (see page 31).

To cancel the Capture function, select [No].

Select [Yes] to capture
the projected image.

Select [Yes] to
stop capturing.

Capture

Logo select

This function decides on the starting-up display from

among following options.

User ......... Show the image you captured

Default ..... Show the factory-set logo

Off ........... Show the countdown display only

Logo (Logo and Logo PIN code lock settings)

This function allows you to customize the screen logo with

Logo select, Capture, and Logo PIN code lock functions.

Logo

✔

Note:

• When “On” is selected in the Logo PIN code lock

function, Logo select and Capture functions cannot
be selected.

✔

Note:

• Before capturing an image, select “Standard” in

the Image Menu to capture a proper image (p.41).

• A signal from a computer can be captured up

to SXGA+ (1400 x 1050). A signal from video
equipment can be captured.

• When capturing the image that has been adjusted

by the Keystone function, the adjusted data is
automatically reset and the projector captures an
image without keystone correction.

• When capturing an image, the resolution may

lower depending on the input signal.

• When the Logo PIN code lock function is set to

“On,” the Capture function cannot be selected.

• When starting to capture a new image, the

previously stored image is cleared even if you
cancel the capturing.

• “User” cannot be selected when the image is not

captured.

Setting