Philips V200 Manual Do Utilizador

REF 1057983 A

Respironics V200 Ventilator Operator’s Manual

The monitor screen (Figure 8-34) is the default screen, and is automatically 
displayed if the screen has not been touched for 15 minutes. The screen can 
also be viewed by pressing the MONITOR button. The screen is shown in 
Figure 8-34. The patient data and settings displayed on this screen depend on 
the active breath type (Refer to Table 8-8: “Monitor Screen Settings 
Displayed” and Figure 8-34.)

Spont VE

Spontaneous Minute Volume
The spontaneous ventilation 
normalized to one minute. 
Compliance compensated (if 
enabled).

0.00 to 99.9 L
(BTPS)

0.01 for 0.00 to 
9.99
0.1 for 10.0 to 99.9

Total VE

Exhaled Minute Volume
The total volume exhaled by the 
patient in one minute. 
Compliance compensated (if 
enabled.)

0.00 to 99.9 L
(BTPS)

0.01 for 0.00 to 
9.99
0.1 for 10.0 to 99.9

% O

2

 

One second average of O

2 

sensor reading (if O

2

 sensor is 

installed).

0.0 to 110%

0.01 for 0.00 to 
9.99
1 for 100 to 110

Spont Rate Spontaneous Respiratory Rate

The respiratory rate of 
spontaneous breaths.

0.0 to 150 
Bpm

0.1 for 0.0 to 9.9
1 for 10 to 150

Total Rate

Total Respiratory Rate
The respiratory rate for all 
breaths.

0.0 to 150 
Bpm

0.1 for 0.0 to 9.9
1 for 10 to 150

F/V

t

Rapid Shallow Breathing Index
The ratio of the respiratory rate 
to exhaled tidal volume for 
spontaneous breaths.

0 to 150 Bpm/
L

1

I:E Ratio

I:E Ratio
The ratio of inspiratory time to 
expiratory time.

9.9:1 to 1:99

0.1 for 9.9:1 to 
1:9.9
one (1) for 1:10 to 
1:99

NOTE:

Pt. Leak only appears on Patient Data block on Settings screen.