Philips V200 Manual Do Utilizador

REF 1057983 A

Respironics V200 Ventilator Operator’s Manual

Follow the steps outlined below to remove and replace the inspiratory bacteria 
filter.

1. Disconnect circuit tubing (1) from inspiratory bacteria filter outlet (2).

2. Disconnect filter (3) from the gas outlet (4). If optional O

2

 sensor is 

installed, ensure it is not dislodged. When used, O

2

 sensor is located 

between gas outlet (4) and filter (3).

3. Insert new filter onto the gas outlet (4) with flow direction indicator 

(on the filter) pointing away from the ventilator.

4. Reconnect circuit tubing (1) to new filter outlet (2).

Refer to the illustration below and follow the steps outlined below to remove 
and replace the expiratory bacteria filter.