Soyo SY-7VCA2 Manual Do Utilizador
BIOS Setup Utility
SY-7VCA2
80
Wake Up
Events
Events
Setting
Description
Note
OFF
Default
HDD & FDD
ON
When On of HDD & FDD, any
activity from one of the listed
system peripheral devices wakes up
the system.
activity from one of the listed
system peripheral devices wakes up
the system.
OFF
PCI Master
ON
When On of PCI Master, any
activity from one of the listed
system peripheral devices wakes up
the system
activity from one of the listed
system peripheral devices wakes up
the system
Default
Disabled
PowerOn by
PCI Card
PCI Card
Enabled
If enabled any PCI interrupt will
wake up the system.
wake up the system.
Default
Disabled
Modem Ring
Resume
Resume
Enabled
An input signal on the serial Ring
Indicator (RI) line (in other words,
an incoming call on the modem)
awakens the system from a soft off
state.
Indicator (RI) line (in other words,
an incoming call on the modem)
awakens the system from a soft off
state.
Default
Disabled
The system ignores the alarm.
Default
Resume by
Alarm
Alarm
Enabled
Set alarm to power on the system by
the date (1-31) or time (hh:mm:ss).
If the date is set to [0], the system
will self-power on by alarm
everyday at the set time.
the date (1-31) or time (hh:mm:ss).
If the date is set to [0], the system
will self-power on by alarm
everyday at the set time.
ON
Default
Primary INTR
OFF
When set to On, any event occurring
at will awaken a system which has
been powered down.
at will awaken a system which has
been powered down.
Primary
IRQ3(COM2), IRQ4(COM1),
IRQ5(LPT2), IRQ6(Floppy Disk),
IRQ7(LPT1), IRQ12(PS/2 mouse),
IRQ13(Coprocessor),
IRQ14(HardDsik)
IRQ5(LPT2), IRQ6(Floppy Disk),
IRQ7(LPT1), IRQ12(PS/2 mouse),
IRQ13(Coprocessor),
IRQ14(HardDsik)
IRQs Activity
Monitoring
(Press Enter)
Monitoring
(Press Enter)
Secondary IRQ9(IRQ2 Redir),
IRQ10( Reserved),
IRQ11(Reserved)
IRQ11(Reserved)
Disabled
IRQ8 (RTC Alarm), IRQ15
(Reserved)
(Reserved)