ONKYO CR-B8 Manual Do Utilizador
50
Using the Timer Functions
—Continued
• You can use this function to cancel or resume the pro-
grammed timer operation.
• You cannot program the timers unless the clock is set.
Tip:
You can also perform the operation by using the TIMER
button and
button and
/
button on the remote controller.
Tip:
You can also perform the operation by using the TIMER,
ENTER and EDIT/NO/CLEAR buttons on the remote
controller.
ENTER and EDIT/NO/CLEAR buttons on the remote
controller.
Switching the Timer On and Off
1
Repeatedly press TIMER to display
the desired timer number.
the desired timer number.
If the timer number is lit, the correspond-
ing timer has been programmed.
ing timer has been programmed.
2
Turn MULTI JOG to switch the
timer on or off.
timer on or off.
After the timer is switched on or off, the
unit displays the previous screen.
unit displays the previous screen.
2
1
Display
1
or
Viewing the Timer Settings
1
Repeatedly press TIMER to display
the desired timer number, then
press MULTI JOG.
the desired timer number, then
press MULTI JOG.
2
Press MULTI JOG to view the sub-
sequent timer settings.
sequent timer settings.
Repeatedly pressing MULTI JOG
enables you to view the subsequent set-
tings.
enables you to view the subsequent set-
tings.
Notes:
• You can change the settings by turning
MULTI JOG.
• If the timer is turned off and you
change the settings, the timer is auto-
matically turned on.
matically turned on.
Check all the settings. If you do not
change any settings, the unit returns to
the previous display.
To return to the previous display, press
EDIT/NO/CLEAR.
change any settings, the unit returns to
the previous display.
To return to the previous display, press
EDIT/NO/CLEAR.
1, 2
1
Display
CRB8.book 50 ページ ２００５年８月１８日 木曜日 午後６時４０分