ONKYO tx-nr646 Manual Do Utilizador

Operating Other Components with the Remote Controller

¼



Find the remote control code in the remote control code list.
1.  Look up the 

Remote Control Codes

 for the 

corresponding remote control code.

● The codes in the Remote Control Code List are those 

known as of the date of publication and may be 

changed.

● The following REMOTE MODE buttons are 

preprogrammed with remote control codes. 

BD/DVD: Onkyo Blu-ray Disc/DVD player 

CD: Onkyo CD player 

STRM BOX: Apple TV

● Only TV remote control codes can be entered for TV.

● Program a remote control code in accordance 

with the input since each button also works as the 

input selector. (For example, when the CD player 

is connected to the CD jack, program the remote 

control code for the CD player to CD)

2.  Press and hold DISPLAY for 3 or more seconds while 

holding down the REMOTE MODE button to which you 

want to program the remote control code.

● The remote indicator lights in the input mode.

3.  With the number buttons, enter the 5-digit remote control 

code within 30 seconds.

● Programming is complete when the remote indicator 

flashes twice. The remote indicator flashes once 

slowly when programming the remote control code 

fails. Try programming again.

¼



The colored button assignment on the AV receiver's remote 

controller can be remapped to match that on the remote 

controller of the component whose remote control code you 

programmed to REMOTE MODE. However, you will not be 

able to remap the colored buttons if Zone 2 is selected.
1.  Hold down the REMOTE MODE button to map and A 

(Red) simultaneously until the remote indicator lights 

(about 3 seconds).

● Remapping is possible only for codes included in the 

categories of the Remote Control Code List (DVD 

player, TV, etc.)

2.  Within 30 seconds, press the colored buttons from left to 

right, in the order you want to remap.

● For example, if the colored buttons on the remote 

controller of the other component are yellow, green, 

blue, and red from left to right, press the buttons on 

the AV receiver's remote controller in that order.

● Programming is complete when the remote indicator 

flashes twice. The remote indicator flashes once 

slowly when programming the remote control code 

fails. Try programming again.

● Pressing any other button than a colored button 

cancels the remap operation.

¼



You can reset the remote control code registered in the 

REMOTE MODE button to its default status. This operation 

can be executed on a single REMOTE MODE button.
1.  Press and hold Q for 3 or more seconds while holding 

down the REMOTE MODE button you want to reset.

● The remote indicator will light.

2.  Within 30 seconds, press the REMOTE MODE button 

again.

● Resetting is complete when the remote indicator 

flashes twice.

To reset all the remote controller settings: While holding 

down RECEIVER, press and hold Q for 3 or more seconds 

until the remote indicator stays lit. Within 30 seconds, press 

RECEIVER again. Resetting is complete when the remote 

indicator flashes twice.