Hitachi 55PD5000 Manual Do Utilizador

10

Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar.

1) Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown.

2) Using commercially available wood screws, secure the set firmly in position.

•  If you have purchased the model without the stand attached:

When installing the monitor, use the optional Desk-top Stand (CMPAD16N).
The Desk-top Stand has been used for the illustrations in this manual.

•  Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not

attempt this work yourself. Ask your dealer to provide the name of a qualified installer.

•  In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches :

For a desktop set-up) or more between the sides and other objects such as walls, etc., so
that the ventilation holes are not blocked.(

✻)

CAUTION

Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury.

CAUTION

10cm (4 inches) or more

*

cord or chain

clamp

Wall or Pillar

Two places

Wood screw

Hook

Cord or Chain

cord or chain for 55"

clamp

Wall or Pillar

Hook

Cord or Chain

Use one of the special mount units to install this product.  A mount of insufficient strength or inadequate design can cause overturning or
dropping and result in fire, electrical shock or injury.  Please note that our company assumes absolutely no responsibility for personal injuries
or property damage caused by use of other mount units or improper installation. 

WARNING