Toshiba SD-M1201 Manual Do Utilizador
5
Daisy-Chaining - If the DVD-ROM you are installing is one of two or
more SCSI devices you are connecting to your system, you will need to
use a custom built SCSI interface cable. Remember that the terminator
jumper on the DVD-ROM drive must have the jumper installed when the
drive is the last device in the chain.
more SCSI devices you are connecting to your system, you will need to
use a custom built SCSI interface cable. Remember that the terminator
jumper on the DVD-ROM drive must have the jumper installed when the
drive is the last device in the chain.
DVD-ROM
DRIVE
Host Computer
I/F Card
Terminator
SCSI Cable
Interface Connector
DVD-ROM
DRIVE
#2
DVD-ROM
DRIVE
#N
(N < 7)
Install Terminator Jumper
only on the last drive of BUS
(see note 1)
Host Computer
I/F Card
Terminator
SCSI Cable
SD-M1201 CONNECTION (ONE DRIVE)
SD-M1201 DAISY-CHAIN CONNECTION
(MULTIPLE DRIVES)
If connecting more
than three SCSI
devices, you need to
use a custom built
SCSI Interface Cable.
than three SCSI
devices, you need to
use a custom built
SCSI Interface Cable.
SD-M1201
INTERNAL DRIVE(S)
DVD-ROM
DRIVE
#1
Notes:
1. Terminator jumper must be jumpered when DVD-ROM is the last
or only device on the SCSI BUS.
2. Terminator jumper should be removed when DVD is in a "daisy-chain"
1. Terminator jumper must be jumpered when DVD-ROM is the last
or only device on the SCSI BUS.
2. Terminator jumper should be removed when DVD is in a "daisy-chain"
and is NOT the last drive.
Interface
Connector
(see note 2)
(see note 2)
(see note 1)