Thermador KBUDT4250A Manual Do Utilizador

Página de 60
13
D o o r B i n s
Large door bins hold gallon containers and the smaller door bins 
hold 2-liter bottles. The door bins are adjustable and removable 
for easy cleaning and adjusting.
Gallon Door Bin
NOTE: The gallon door bin can only be placed on the lower 
support.
1. Insert the attachment brackets into the adjustment slots on 
the door.
2. Push down on the bin to secure tabs.
3. If necessary, adjust interior shelves to allow for milk jugs and 
tall beverage containers stored in the gallon door bin.
Door Bins
1. Remove the bin by lifting it up and pulling it out.
2. Replace the bin by sliding it in above the desired support and 
pushing it down until it stops.
REFRIGERATOR
CARE
C l e a n i n g
Both the refrigerator and freezer sections defrost automatically. 
However, clean both sections about once a month to prevent 
odors from building up. Wipe up spills immediately.
To clean your refrigerator:
1. Remove the top grille. See “Power On/Off Switch.”
2. Press power switch to OFF.
3. Remove all removable parts from inside, such as shelves, 
crispers, etc.
4. Hand wash, rinse, and dry removable parts and interior 
surfaces thoroughly. Use a clean sponge or soft cloth and a 
mild detergent in warm water. 
Do not use abrasive or harsh cleaners such as window 
sprays, scouring cleansers, flammable fluids, cleaning 
waxes, concentrated detergents, bleaches or cleansers 
containing petroleum products on plastic parts, interior 
and door liners or gaskets. Do not use paper towels, 
scouring pads, or other harsh cleaning tools. These can 
scratch or damage materials.
To help remove odors, you can wash interior walls with a 
mixture of warm water and baking soda (2 tbs. to 1 qt. 
[26 g to .95 L] of water).
5. Wash stainless steel and painted metal exteriors with a clean 
sponge or soft cloth and a mild detergent in warm water. Do 
not use abrasive or harsh cleaners. Dry thoroughly with a soft 
cloth. For additional protection against damage to painted 
metal exteriors, apply appliance wax (or auto paste wax) with 
a clean, soft cloth. Do not wax plastic parts. 
6. Clean the condenser coils located behind the top grille 
ventilation panel regularly. Coils may need to be cleaned as 
often as every other month. This may help save energy.
Use a vacuum cleaner with an extended attachment to 
clean the condenser coils when they are dusty or dirty. 
7. Clean defrost pan using mild detergent in warm water. Dry 
thoroughly. 
Remove the base grille by removing a screw at each end. 
Remove the defrost pan by pushing up on the retaining 
clip under the refrigerator while sliding the pan forward. 
Replace the defrost pan by positioning the edge of the 
defrost pan approximately 7 in. (17.8 cm) from the left 
side of the refrigerator. Lift defrost pan into guides and 
push back and place pan inside of retaining clip. Replace 
the base grille and base grille screws. 
8. Press the power switch to the ON position.
9. Replace the top grille. See “Power On/Off Switch.”
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion,
or fire.
1. Defrost pan
2. Retaining clip
1
2