Compaq 517212-001 Manual Do Utilizador

14 Remove the four screws (two on each side) that hold 

the optical drive in the drive cage.

15 Remove the drive cage from the drive.

1 Place the drive cage onto the drive.

2 Align the holes marked “2” on the drive cage with the 

holes on the sides of the disc drive.

NOTE: The black, optical drive cage retention screws 
are metric screws. 

IMPORTANT: The new (replacement) part may not look 
the same as the original part, due to different 
manufacturers or models. HP always provides quality 
parts that meet or exceed your original computer 
specifications.

Please do not return this part because it is different. Follow 
the steps in this procedure to install your new drive.