WhisperKool XLT 4200 Manual Do Utilizador

Página de 36
Page 14
XLT 020111
LIQUID MEASURING THERMOSTAT SYSTEM
Room-temperature 
Water
Fill an empty bottle with room-temperature 
water; then insert the probe.
All WhisperKOOL units come equipped with our Pre-
cision Digital Technology (PDT/PDT JR) liquid tem-
perature measuring thermostat system. This system 
incorporates the following advantages:
1.  Self-Calibrating  Probe:  The  probe  contains  a 
sensor chip, which actually communicates back 
and forth to the thermostat. This results in a con-
sistent temperature setting and accuracy. Do not 
remove the tip from the probe!
2. Built in Defrost Cycle: The unit is designed to shut 
off for five minutes every ninety minutes in order 
to prevent frost build up. This allows the cooling 
unit to continue to cool effectively in demanding 
environments.  A  count  down  timer  is  observed 
by depressing the center button on the thermo-
stat. (PDT upgrade version only)
3.  Heavy-duty  Circuitry:  The  circuitry  within  this 
new  unit  has  been  upgraded  to  resist  power 
surges,  which  play  havoc  on  electrical  compo-
nents.  This  improvement  will  ensure  years  of 
trouble-free use. However, for high reliability, we 
still recommend that the customer install a surge 
protector for the unit itself.
4. Fahrenheit and Celsius Readout (PDT upgrade 
version  only):  The  thermostat  has  the  ability  to 
produce the readout in both Fahrenheit and Cel-
sius for overseas customers. The readout can be 
changed by depressing both the center and right 
buttons at the same time.
Measuring liquid temperature has a few unique 
advantages:
1.  Wine temperature is kept in a very precise con-
trolled  environment.  This  assures  a  consistent 
temperature.
2.  By  measuring  the  liquid  temperature  rather 
than  air,  the  unit  will  operate  75-  80%  of  the 
time. See page 2.
To Use the thermostat:
1. Locate an empty wine bottle.
2.  Fill 3/4 full with room temperature tap water.
3. Place bottle probe securely into bottle.
4.  Place bottle with probe in a central location of 
your wine cellar.
Avoid pulling too much on the probe cord. It may 
become  disconnected  resulting  in  non  operation 
of the unit.
Note: Thermostat can be set between 50°F and 
76°F.
Remember: The WhisperKOOL System is based on 
the temperature of the wine.  Do not be misled by 
thermostats reading air temperature. The air tem-
perature in the cellar will be cooler than the liquid 
temperature of the wine while it is coming to opti-
mum balanced temperature.