APW Wyott XTRM-3 Manual Do Utilizador
4
!
!
WARNING: Genuine APW Wyott Replacement Parts are specified to operate safely in the
environments in which they are used. Some aftermarket or generic replacement parts do not have
the characteristics that will allow them to operate safely in APW Wyott equipment. It is essential to
use APW Wyott Replacement Parts when repairing APW Wyott equipment. Failure to use APW
Wyott Replacement Parts may subject operators of the equipment to hazardous electrical voltage,
resulting in electrical shock or burn.
environments in which they are used. Some aftermarket or generic replacement parts do not have
the characteristics that will allow them to operate safely in APW Wyott equipment. It is essential to
use APW Wyott Replacement Parts when repairing APW Wyott equipment. Failure to use APW
Wyott Replacement Parts may subject operators of the equipment to hazardous electrical voltage,
resulting in electrical shock or burn.
!
!
WARNING: This product has no “user” serviceable parts. To avoid damage to the unit or injury to
personnel, use only Authorized APW Wyott Service Agents and genuine APW Wyott Parts when
service is required..
personnel, use only Authorized APW Wyott Service Agents and genuine APW Wyott Parts when
service is required..
!
!
CAUTION: Some exterior surfaces on the unit will get hot. Use caution when touching these areas
to avoid injury.
to avoid injury.
!
CAUTION: Locate the unit at the proper counter height, in an area that is convenient for use. The
location should be level to prevent the unit or it’s contents from accidentally falling, and strong
enough to support the weight of the unit and food.
location should be level to prevent the unit or it’s contents from accidentally falling, and strong
enough to support the weight of the unit and food.
!
!
!
CAUTION: Use only non-abrasive cleaners. Abrasive cleaners could scratch the finish of your unit,
marring it’s appearance and making it susceptible to dirt accumulation.
marring it’s appearance and making it susceptible to dirt accumulation.
!
!
WARNING:
Failure to provide clearances will cause unit failure and invalidate warranty claims
(see installation instructions).
!
!
NOTICE
:
Do not use toppings (butter, etc.) on product as product is inverted during normal
operation.
!
!
NOTICE: Operating toaster without legs invalidates any warranty claims.
!
!
NOTICE:
Neglecting to keep fan opening clean could result in toaster failure.
2. GENERAL INFORMATION
XTRM-2: 1.
2. Product Opening - 1.50”H
3. Electrical Requirements (Single phase):
3. Electrical Requirements (Single phase):
A. 208 Volt, 2840 Watt, 13.7 Amp.
B. 230/240 Volt, 2840 Watt, 11.9 Amp.
C. Cordset configuration
B. 230/240 Volt, 2840 Watt, 11.9 Amp.
C. Cordset configuration
1. Each toaster equipped with three wire grounded cordset and standard 3 prong plug.
4. Net/Shipping Weight – 49
2. Product Opening - 1.50”H
3. Electrical Requirements (Single phase):
3. Electrical Requirements (Single phase):
A. 208 Volt, 3340 Watt, 16.1 Amp.
B. 230/240 Volt, 3340 Watt, 14.0 Amp.
C. Cordset configuration
B. 230/240 Volt, 3340 Watt, 14.0 Amp.
C. Cordset configuration
1. Each toaster equipped with three wire grounded cordset and standard 3 prong plug.
4. Net/Shipping Weight –
Overall Dimensions w/Wire Feeder - 15.033”H (38.183cm) x 16.191”W (41.125cm) x
19.658”D (49.931cm)
(3.810cm) x 10.50”W (26.67cm)
lb.(22.26kg) / 46lb.(20.865kg)
XTRM-3: 1. Overall Dimensions w/Wire Feeder - 15.033”H (38.183cm) x 19.191”W (48.745cm) x
19.658”D (49.931cm)
(3.810cm) x 13.50”W (34.29cm)
50 lb.(22.8kg) / 47 lb.(21.319kg)