Ariens 911163 - LM21S CARB Manual Do Utilizador

GB - 12

Start mowing slowly and use speed control 
rod to gradually increase speed to a safe, 
comfortable walking pace.
Speed control rod should hold the desired 
speed. If not, adjust speed control bell crank. 
(See SPEED CONTROL BELL CRANK  (self-
propelled models) on page 20.)

NOTE: Engine must be running for wheel 
drive to propel unit.
To drive forward:

Slowly squeeze and hold wheel drive control 
against handlebar.

To stop:
Release wheel drive control.

To hold wheel straight:

1. Push swivel wheel lock forward.
2. Push unit forward until wheel locks in 

place.

To allow wheel to swivel:

1. Pull swivel wheel lock back.

To add fuel to fuel tank:

1. Put unit in open or well-ventilated area.
2. Stop engine and allow to cool.
3. Clean fuel cap and surrounding area.
4. Remove cap.

IMPORTANT: See engine manual for correct 
type and grade of fuel.

5. Fill fuel tank. (see SPECIFICATIONS on 

page 23 for tank capacity.)

6. Replace fuel cap and tighten.
7. ALWAYS clean any spilled fuel.

CAUTION: Unit will move forward 
at engine start if wheel drive 
control is engaged. ALWAYS 
release wheel drive control before 
starting unit.

Figure 7

Fast –Push rod all the 
way forward.

Slow –Pull rod all the 
way rearward.

CAUTION: Avoid loss of control. 
Lock swivel wheels when mowing 
on a slope or hill. Do not mow on 
steep slopes.

OM1240

Lock - Wheel Held 
Straight

Unlock - Wheel 
Swivels

OM1700