Yard Machines 462 Thru 465 Manual Do Utilizador

Página de 16
 5
Figure 2  Safety labels found on your unit
DANGER
TO AVOID SERIOUS INJURY:
• 
DO NOT DEPOSIT BRANCHES LARGER THAN 1/2 INCH DIAMETER INTO THIS HOPPER.
• 
WEAR APPROVED SAFETY GLASSES, GLOVES AND EAR PROTECTION.
   
AVOID LOOSE FITTING CLOTHING.
• 
Read the Owner’s Manual before starting and using this chipper/shredder.
 Keep hands, feet, face and clothing out of shredder hopper inlet and chipper chute inlet.
• 
Keep hands, feet, face and clothing away from discharge area and moving parts.
• Keep hands and feet out of discharge opening when chipper/shredder is running. The 
      
rotating cutting blades inside opening will cause serious personal injury.
• Do not transport unit with engine running.
• 
Keep bystanders, children, and pets away from operating and discharge 
WARNING
TO AVOID A FIRE HAZARD, KEEP LEAVES, GRASS, AND OTHER COMBUSTIBLE
MATERIALS AWAY FROM HOT ENGINE AND MUFFLER.
• If chipper/shredder jams or becomes clogged, shut engine off right away and wait for
   all moving parts to come to a complete stop. Disconnect the spark plug wire and prevent 
   it from touching the spark plug. Use only a long wooden stick (or long-handled shovel) to 
   clear away discharged materials or blockages.
• Keep all shields and guards in place and securely attached.
• DO NOT use hands or feet to clear material from the discharge area or discharge opening.
• DO NOT install parts, or remove, adjust, or service the discharge screen or any other part while
   the chipper/shredder is running. DO NOT operate the chipper/shredder on uneven ground, or on a 
   paved, gravel, or hard surface. DO NOT run engine in an enclosed area-exhaust gas contains 
   poisonous carbon monoxide fumes.
AC
0158A
WARNING
TO AVOID A FIRE HAZARD, KEEP LEAVES, GRASS, AND OTHER 
MATERIALS AWAY FROM HOT ENGINE AND MUFFLER.
• If chipper/shredder jams or becomes clogged, shut engine off right away and wait for
   all moving parts to come to a complete stop. Disconnect the spark plug wire and prevent 
   it from touching the spark plug. Use only a long wooden stick (or long-handled shovel) to 
   clear away discharged materials or blockages.
• Keep all shields and guards in place and securely attached.
• DO NOT use hands or feet to clear material from the discharge area or discharge opening.
• DO NOT install parts, or remove, adjust, or service the discharge screen or any other part while
   the chipper/shredder is running. DO NOT operate the chipper/shredder on uneven ground, 
   paved, gravel, or hard surface. DO NOT run engine in an enclosed area-exhaust gas contains
   poisonous carbon monoxide fumes.
WARNING:   DO NOT OPERATE
TH IS MACHINE UNLESS THE
CHUTE DEFLECTOR HAS BEEN
PROPERLY INSTALLED AND IS
S E C U R E D   WIT H   TH E   H A N D
KNOBS.
ROTATING CUTTING BLADES.
KEEP HANDS AND FEET  OUT
OF OPENING WHILE MACHINE
IS RUNNING.
DANGER
!
 COMBUSTIBLE
or on a