Mermaid Technology 150170181190 Manual Do Utilizador
mermaid ventura 150/170/181/190 TFT Video Models - Users Manual Version 3.0a
___________________________________________________________________________________
___________________________________________________________________________________
Page 4 of 18
3.
Content of the Box
•
ventura 150 TFT (15”), ventura 170 TFT (17”), ventura 181 TFT (18.1”) or ventura 190 TFT (19”)
•
”Quickstart” card
Accessories bag including:
•
PSU (45 Watt)
• Powercord (Country specific)
•
Speaker cable
• Users manual
•
Glass cleaner & screen wiping cloth
4. Unpacking, Placement and Setup (PC)
Note: To avoid condensation, please wait ½-1 hour, before operating the unit.
After the box has been opened, remove the accessories bag.
Bend the cardboard flaps outward and turn the box upside down, which will ensure the inlay foam with the
monitor is able to slide out. Do not drop the content on the floor.
Remove the foam side pieces and the plastic bag.
The monitor needs to be placed on a smooth and stable surface. This surface must be able to safely support 15 kg
(17”, 18.1” & 19”) or 10 kg (15”).
Make sure both the computer and monitor are turned off before connecting the monitor.
• Connect the monitor to the computer by means of the supplied VGA cable. (Attached to the monitor)
Bend the cardboard flaps outward and turn the box upside down, which will ensure the inlay foam with the
monitor is able to slide out. Do not drop the content on the floor.
Remove the foam side pieces and the plastic bag.
The monitor needs to be placed on a smooth and stable surface. This surface must be able to safely support 15 kg
(17”, 18.1” & 19”) or 10 kg (15”).
Make sure both the computer and monitor are turned off before connecting the monitor.
• Connect the monitor to the computer by means of the supplied VGA cable. (Attached to the monitor)
• Connect the PSU to the monitor and AC outlet.
•
Turn on the computer and monitor.
• ventura 150 TFT, ventura 170 TFT, ventura 181 TFT and ventura 190 TFT are plug & play compatible via
VESA DDC1/2B. Windows 98, ME and XP will recognise this and self configure.
• When using the ventura 150 TFT, ventura 170 TFT, ventura 181 TFT or ventura 190 TFT with Windows
NT, the computer needs to be started in VGA mode the first time. Log on as administrator and set the
resolution to 1280x1024 (17”, 18.1” & 19”) or 1024x768 (15”). Set the refresh rate to 60 Hz. The computer
can then be started in normal mode.
resolution to 1280x1024 (17”, 18.1” & 19”) or 1024x768 (15”). Set the refresh rate to 60 Hz. The computer
can then be started in normal mode.
OSD panel is located
beneath the monitor
beneath the monitor