Heartland 3530 Manual Do Utilizador

Página de 65
34
Metro / Legacy Series
12. Self Clean
1.
Press        self clean symbol. (countdown timer is automatically set at 3:00 hours and the
      self clean indicator light begins to flash)
2.
Press      decrease symbol to change cleaning time if needed.
3.
To correct time set press      increase or      decrease as needed.  Self clean cycle may be
set between 1:30 to 3:00 hours. (fast scrolling begins after holding      increase or
    decrease 
symbol keys for over 5 seconds)
12A. Regular Self Clean
(please read all steps prior to setting the self clean function. Oven door must be closed)
Warning: remove all cookware, racks, and rack supports from oven during self clean cycle
to prevent them from becoming dull and blue-gray.  Refer to Section 7 : Care and Clean-
ing for additional information prior to self cleaning the oven.
1.
Press        self clean symbol. (countdown timer is automatically set at 3:00 hours and the
      self clean indicator light begins to flash)
2.
Press      decrease symbol to change cleaning time if needed.
3.
To correct time set press      increase or      decrease as needed.  Self clean cycle may be
set between 1:30 to 3:00 hours. (fast scrolling begins after holding      increase or
    decrease symbol keys for over 5 seconds)
4.
Press          start symbol to begin self clean cycle.        self clean indicator light will glow
and oven door will automatically lock after a few minutes and cooling fan will start up.
After 5 seconds the time of day will be displayed.
5.
Press        cancel symbol to end self clean cycle at any time.        self clean indicator light
will go off.  Oven will only unlock when temperature in oven falls below 550F or 300C
and cooling fan will shut off.  Only time of day will be displayed.
6.
At end of self clean cycle,        self clean indicator light will go off.  Oven will only unlock
when temperature in oven falls below 550F or 300C and cooling fan will shut off.  Only
time of day will be displayed.
12B. Delayed Time Self Clean
(please read all steps prior to setting the delayed time self clean function)