Whirlpool RS696PXG Manual Do Utilizador

15

The command pads tell the oven what to 
do and in what order. Some command pads
have an Indicator Light. The Indicator Light
comes on when you press the command
pad. The ON Indicator Light comes on 
when you press START/ENTER for an oven
function.

The control lock prevents unwanted use of
the oven by disabling most of the control
panel command pads (except CLOCK and
TIMER SET/OFF).

Control lock is only available when oven
is not in use or control has not been set.

Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.

After programming a function, you must

press START/ENTER to start the
function. If you do not press
START/ENTER within 5 seconds
of programming, “START?” will

show on the display as a reminder. The 
control will return to time of day mode after
5 minutes if START/ENTER is not pressed.

OFF/CANCEL will cancel any function 

except for the Clock and Timer Set
functions. When you press
OFF/CANCEL, the display will
show the time of day or, if Minute

Timer is also being used, the time remain-
ing. To cancel the Minute Timer, see “Using
the electronic Minute Timer” section.

To lock or deactivate the control panel:
Press and hold START/ENTER for 5 

seconds. A single tone will sound
and “Loc” and

will appear on the

temperature display. When the 
control is locked, “START?” will

appear on the display if you press any 
command pad.

To unlock the control panel:
Press and hold START/ENTER for 5 

seconds. A single tone will sound
and “Loc” and

will disappear from

the temperature display.

NOTE: You may hear a fan blowing in 
the oven even after you press OFF/CANCEL.
This is the cooling fan. It will turn off when
the oven cools down.

ENTER

ENTER

ENTER

3191537v08c75  9/1/98 2:32 PM  Page 15