Thermador PG30 Manual Do Utilizador
10
Step 4: Installing Anti-Tip Device
• Screwdriver, Phillips
• Hammer
• Drill, electric or hand
• Pencil or other marker
• Measuring tape or ruler
• 1/8" drill bit (wood or metal wall or floor)
• 3/16" carbide-tipped masonry drill bit (concrete or concrete block wall or floor)
• 3/16" anchors, drywall or concrete, 4 each (not required if mounting bracket is being attached to solid wood or metal)
For all 30" and 36" ranges, an anti-tip device must be installed as per these
instructions.
instructions.
WARNING
RANGE TIPPING HAZARD
•
All ranges can tip and injury can result.
To prevent accidental tipping of the range,
attach it to the floor, wall or cabinet by
installing the Anti-Tip Device supplied.
To prevent accidental tipping of the range,
attach it to the floor, wall or cabinet by
installing the Anti-Tip Device supplied.
•
A risk of tip-over may exist if the appli-
ance is not installed in accordance with
these instructions.
ance is not installed in accordance with
these instructions.
•
If the range is pulled away from the wall
for cleaning, service or any other reason,
ensure that the Anti-Tip Device is prop-
erly reengaged when the range is pushed
back against the wall. In the event of
abnormal usage (such as a person stand-
ing, sitting, or leaning on an open door),
failure to take this precaution can result
in tipping of the range. Personal injury
might result from spilled hot liquids or
from the range itself.
for cleaning, service or any other reason,
ensure that the Anti-Tip Device is prop-
erly reengaged when the range is pushed
back against the wall. In the event of
abnormal usage (such as a person stand-
ing, sitting, or leaning on an open door),
failure to take this precaution can result
in tipping of the range. Personal injury
might result from spilled hot liquids or
from the range itself.
ATTENTION
PROPERTY DAMAGE
•
Contact a qualified installer or contrac-
tor to determine the proper method for
drilling holes through the wall or floor
material (such as ceramic tile, hardwood,
etc.)
drilling holes through the wall or floor
material (such as ceramic tile, hardwood,
etc.)
•
Do not slide the range across an unpro-
tected floor.
•
Failure to follow these instructions may
result in damage to wall or floor cover-
ings.
ings.
WARNING
ELECTRICAL SHOCK HAZARD
•
Use extreme caution when drilling holes
into the wall or floor. There may be con-
cealed electrical wires located behind the
wall or under the floor.
into the wall or floor. There may be con-
cealed electrical wires located behind the
wall or under the floor.
•
Identify the electrical circuits that could
be affected by the installation of the Anti-
Tip Device, then turn off power to these
circuits.
be affected by the installation of the Anti-
Tip Device, then turn off power to these
circuits.
•
Failure to follow these instructions may
result in electrical shock or other per-
sonal injury.
result in electrical shock or other per-
sonal injury.
WARNING
•
ALL RANGES CAN
TIP
TIP
•
INJURY TO PER-
SONS COULD RE-
SULT
SONS COULD RE-
SULT
•
INSTALL ANTI-TIP
DEVICES PACKED
WITH RANGE
DEVICES PACKED
WITH RANGE
•
SEE INSTALLATION
INSTRUCTIONS
INSTRUCTIONS
Tools Needed for Installation of Anti-Tip Device: