Maytag W10392923C Manual Do Proprietário

The Melt Cooking Zone offers flexibility due to a wide range of 
settings between High and Melt. The High heat option can be used 
to boil small amounts of liquid quickly. To reduce the power setting, 
turn the knob clockwise. The Melt setting is designed for delicate 
foods that require low heat, such as when melting chocolate or 
holding sauces. Use cookware appropriate in size for the Melt 
Cooking Zone.

Use the Cooktop Warming Center element to keep cooked foods 
warm. One hour is the recommended maximum time to maintain 
food quality.
Do not use it to heat cold foods.
The Warming Center element can be used alone or when any of the 
other surface cooking areas are being used.
The Warming Center element area will not glow red when cycling 
on. However, the Element On light will glow while the Cooktop 
Warming Center element is in use.

■

Use only cookware recommended for oven and cooktop use.

■

Cover all foods with a lid or aluminum foil. When warming 
baked goods, allow a small opening in the cover for moisture to 
escape.

■

To avoid damage to the cooktop, do not use plastic wrap to 
cover food because the plastic wrap may melt.

■

Use pot holders or oven mitts to remove food.

1. To turn on, press WARMING CENTER ON and then START.
2. To turn off, press WARMING CENTER OFF.

Use the bridge area to create an oblong heated area to cook with 
large cookware. 

1. Push in and turn right rear control knob clockwise from the Off 

position to the SINGLE zone anywhere between LOW and 
HIGH.

2. Turn control knob to Off when finished.
To use SINGLE (C):

1. Push in and turn right front control knob counterclockwise from 

the Off position to anywhere between LOW and HIGH.

2. Turn control knob to OFF when finished.
To use both SINGLE elements and BRIDGE (A+B+C):

1. Push in and turn right rear control knob counterclockwise from 

the Off position to the BRIDGE zone anywhere between LOW 
and HIGH.

2. Push in and turn right front control knob counterclockwise from 

the Off position to anywhere between LOW and HIGH.

3. Turn both control knobs to OFF when finished.
To use both SINGLE elements (A+C):

1. Push in and turn right rear control knob clockwise from the Off 

position to the SINGLE zone anywhere between LOW and 
HIGH.

2. Push in and turn right front control knob counterclockwise from 

the Off position to anywhere between LOW and HIGH.

3. Turn both control knobs to OFF when finished.

A

B

A

A

A

C

C

B

B

A

C

A

C

B