KitchenAid KDRS467 Manual Do Utilizador

The door will not unlock until the oven cools.

When the cycle is complete and the oven cools, “SELF 
CLEAN COMPLETE” will appear on the oven display.

5. Press OFF to clear the oven display.

Press OFF. If the oven temperature is too high, the door will 
remain locked. It will not unlock until the oven cools.

If the oven temperature is too high after self-cleaning, then 
“LOCKED” will appear on the display until the oven completely 
cools. 

IMPORTANT: Before cleaning, make sure all controls are off and 
the oven is cool. Always follow label instructions on cleaning 
products.

Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.

To avoid damage to stainless steel surfaces, do not use soap-
filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-
wool pads, gritty washcloths or abrasive paper towels.

Rub in direction of grain to avoid damaging.

■

KitchenAid

®

 Stainless Steel Cleaner and Polish Part Number 

4396920 (not included) or KitchenAid

®

 Stainless Steel Wipes 

Part Number 8212510 (not included): 

See “Assistance or Service” section to order.

■

Liquid detergent or all-purpose cleaner: 

Rinse with clean water and dry with soft, lint-free cloth.

Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the cooktop, grates and caps are cool. 
These spills may affect the finish.

To avoid chipping, do not bang grates and caps against each 
other or hard surfaces such as cast iron cookware.

Do not reassemble caps on burners while wet.

Do not clean in the Self-Cleaning cycle.

Do not clean in dishwasher.

■

Nonabrasive nylon scrubbing pad and mildly abrasive 
cleanser:

Clean as soon as cooktop, grates and caps are cool.

See “Sealed Surface Burners” section.

To avoid damage to the cooktop controls, do not use steel wool, 
abrasive cleansers or oven cleaner.

To avoid damage, do not soak knobs. 

When replacing knobs, make sure knobs are in the Off position.

Do not remove seals under knobs.

NOTE: When replacing knobs after cleaning either the surface 
burner controls, grill or griddle module control, make sure the 
knobs are replaced to the correct location. The 20,000 Btu/h 
burner knobs have power settings and the grill and griddle knobs 
have temperature settings. All other knobs have Hi, Med, Lo 
settings only.

■

Warm, soapy water:

Pull knobs straight away from control panel to remove.

■

Glass cleaner and a soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

All-Purpose Appliance Cleaner Part Number 31682 
(not included):

See “Assistance or Service” section to order.

■

Self-Cleaning cycle:

For optimal door cleaning result, wipe away any deposits with 
a damp sponge before running cycle.

Activate the Control Lock to avoid touch screen activation during 
cleaning. See “Control Lock” section.

To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels.

■

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

All-Purpose Appliance Cleaner Part Number 31682
(not included):

See “Assistance or Service” section to order.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Cleaning cycle: See “Self-Cleaning Cycle” first.

■

Self-Cleaning cycle: 

See “Self-Cleaning Cycle” first. Remove racks or they will 
discolor and become harder to slide. If this happens, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

■

Steel-wool pad