Smeg A2PY-6 Manual Do Utilizador

 

 

 

Starting cooking: as well as setting a cooking duration, the cooking 
start time can also be set (with a maximum delay of 12 hours from the 
current time). To set the cooking start/end time, proceed as follows: 

- 

Set the cooking duration as described in the previous point. 

- 

Press the 

 key again and hold it down. The current time appears 

on the display: use the 

 and 

 keys to set the cooking start time. 

- 

A few seconds after the last key is pressed, the cooking start time 
will appear on the display. 

- 

At the start of a programmed cooking operation, the dot between 12 
and 1 will also illuminate, indicating that this is a programmed 
cooking procedure.

 

- 

To view the current time at any moment, press the 

 key. After a 

few seconds, the cooking start time will return to the display. 

- 

At the end of the cooking time the timer will switch the oven heating 
elements off, the beeps will start to sound and the numbers on the 
dial will flash. 

- 

To reset the whole program set, keep the central key 

 pressed for 

a few seconds: if cooking has already started, the oven will have to 
be switched off by hand. 

 key for a few seconds. 

Caution: for the oven to start cooking operations after the 
programming procedures just described, the thermostat and 
function selector knob must be correctly set on the temperature 
and function required. 
 
 
5.2.4

Models with analogue/digital programmer feature a "DEMO" function 
which deactivates the heating elements while leaving the other functions 

unchanged. To activate it, simply press the 

, 

, and 

 keys for a few 

seconds. A confirmation beep will inform the user that the function is 
active. 
Once the display shows the current time with the demo function activated, 
the number 6 will flash. 
To deactivate it, simply repeat the same procedure.