Lowrance electronic LMF-200 Manual Do Utilizador

44 

4. Press 

to reset the selected fluid level’s configuration and 

calibration information to the default settings. You will be taken back 

to the Bus Devices list where the selected fluid level will be displayed 

as UnCfg FL. 
WARNING: 

The LMF-200 can support up to three engines with one engine 

interface for each engine. If you have one configured engine interface, it 

will be displayed as Eng Int. If you have three configured fuel flows, 

they will appear as Port Eng, Cen Eng and Stbd Eng. When the 

interface is unconfigured it will be shown as UnCfg Eng. 
Each fuel flow has an internal menu with the following options: Unset 

Engine, Change Engine. Fuel Warning, Reset and Reset Fuel 

Calibration and Reset Trim Calibration.  

If, after configuring, unconfiguring or reconfiguring an engine 

interface, it is not shown on the Bus Devices list, you will have to 

refresh the list. To do this, let the menu time out and press 

. 

Select

 and press 

. Highlight 

 and press 

. The Engine Interface will be listed with its new 

configuration setting.  

To configure Suzuki Engine Interface: 
1. Press 

, use the 

 and 

  keys  to  select 

 and 

press 

.  

2. Highlight 

and press

. The Bus Devices list will 

appear. 
3. Select 

and press 

. The following message will appear: 

Hit Menu to Cfg Eng Int. Press 

. 

4. The Suzuki Engine Model menu will appear with the following 

options: DF40, DF50, DF60, DF70, DF90/115, DF140, DF150, DF175, 

DF200/225, DF250 and DF300. 
5. Select your Suzuki model engine from the list and press 

. The 

Select Engine menu will appear with up to three options: Port, Center 

and Starboard. (If you have a single-engine configuration, you will not 

be taken to the Select Engine menu. You will be taken back to the main 

display.)