Lowrance electronic LMF-200 Manual Do Utilizador

55 

Fill up your tank again, noting how much fuel you added to the tank. 

Compare that number to the Fuel Used figure displayed on the page 

you customized. If the amount of fuel you added to the tank and the 

fuel used figure are off by more than 3 percent, we recommend the 

engine interface be calibrated. 
NOTE: 

You must use the gauge's Refill Tank command when filling your 

fuel tank to keep the engine interface updated with correct 

information on the amount of fuel in the tank. 

Refill Tank 
You will use the Refill Tank option each time you calibrate an engine 

interface and every time you refill your tank, regardless of whether you 

choose to calibrate.  
To calibrate a Suzuki Engine Interface (Refill Tank): 

Add the Fuel Manager page or any of the digital gauge pages to the 

page screen rotation, then customize the selected page to show Fuel 

Used data. To see instructions on how to Add Pages and Customize 

Pages, refer to the Operation Section.  
1. Fill up the fuel tank connected to the engine interface you want to 

calibrate. Press 

, use the 

 and 

 keys to select 

 

and press 

. 

2. Highlight 

 and press 

. Select 

. and press 

. 

The Select Tank menu will open with up to three options: Port, Center 

and Starboard. 
3. Select the tank you refilled and press 

. The Recalibration 

(ReCal?) menu will appear with two options: Yes and No. Select 

 and 

press 

. The following message will appear: Hit Menu if Tank filled 

up.  
4. Press 

, which will direct you to the main display.  

Make sure the Fuel Management page has been added to the main 

display and that the page has been customized to show USD (Fuel 

Used). If the Fuel Management page is not displayed or if it is not 

customized to display USD (Fuel Used), refer to the Add Pages and 

Customizing Pages segments in the Operation section. 

5. Take your boat out, but only use ONE engine — the engine 

connected to the engine interface. Burn at least 5 gallons of fuel, then 

fill up the tank again, noting how much fuel was added to the tank. 

Check the Fuel Management page for the fuel used figure calculated by 

the Suzuki Engine Interface.