Kenwood TS-590S Manual Do Utilizador
TS-590S
47
7 STRUCTURAL FEATURES
We have designed the chassis of the TS-590S to endure heavy-duty operation.
The PCBs are placed as follows: FINAL UNIT on the upper side of the chassis, TX-RX UNIT and LO
UNIT on the lower side, CONTROL UNIT beneath the LO UNIT, NB UNIT and DISPLAY UNIT in
front.
We have placed two cooling fans in the front of the chassis.
The cooling fans have two operation modes: LO and HI. By rotating two fan motors at a lower
revolution speed, we aimed to reduce the operating noise.
The PCBs are placed as follows: FINAL UNIT on the upper side of the chassis, TX-RX UNIT and LO
UNIT on the lower side, CONTROL UNIT beneath the LO UNIT, NB UNIT and DISPLAY UNIT in
front.
We have placed two cooling fans in the front of the chassis.
The cooling fans have two operation modes: LO and HI. By rotating two fan motors at a lower
revolution speed, we aimed to reduce the operating noise.
Figure 7-1 Layout of Printed Circuits Boards of the TS-590S Series
We have optimized the chassis structure using computer-aided thermal analysis to improve the heat
dissipation performance. We have designed the chassis to facilitate smooth air flow.
dissipation performance. We have designed the chassis to facilitate smooth air flow.
Figure 7-2 Results of Computer-aided Thermal Analysis
7.1 Cooling
FINAL UNIT
TWIN FAN
TX-RX UNIT
LO UNIT
NB UNIT
CONTROL
UNIT
DISPLAY UNIT