Kenwood TS-480HX Manual Do Utilizador
15
3 GETTING ACQUAINTED
q MIC connector
Connect a cable from the supplied microphone to this
connector {page 6}.
Connect a cable from the supplied microphone to this
connector {page 6}.
w PANEL connector
Connect a cable from the Remote Control panel to
this connector {page 6}.
Connect a cable from the Remote Control panel to
this connector {page 6}.
e EXT.SP jack
Mate with a 3.5 mm (1/8"), 2-conductor (mono) plug
for connecting an external speaker {page 7}.
Mate with a 3.5 mm (1/8"), 2-conductor (mono) plug
for connecting an external speaker {page 7}.
r DATA connector
Mates with a 6-pin male DIN connector for connecting
various accessory equipment, such as an external
TNC/ MCP or a RTTY terminal {pages 77, 78}.
Mates with a 6-pin male DIN connector for connecting
various accessory equipment, such as an external
TNC/ MCP or a RTTY terminal {pages 77, 78}.
t REMOTE connector
Mates with a 6-pin male mini DIN connector for
connecting an HF/ 50 MHz linear amplifier {page 77}.
Mates with a 6-pin male mini DIN connector for
connecting an HF/ 50 MHz linear amplifier {page 77}.
y COM connector
Mates with a DB-9 female connector for connecting a
computer via one of its serial communication (COM)
ports {page 67}. Also used with the Quick Data
Transfer function {pages 66, 76} and DX
PacketCluster Tune function {pages 72, 79}.
Mates with a DB-9 female connector for connecting a
computer via one of its serial communication (COM)
ports {page 67}. Also used with the Quick Data
Transfer function {pages 66, 76} and DX
PacketCluster Tune function {pages 72, 79}.
u PADDLE and KEY jacks
The PADDLE jack mates with a 6.3 mm (1/4")
3-conductor plug for connecting a keyer paddle to the
internal electronic keyer. The KEY jack mates with a
3.5 mm (1/8") 2-conductor plug for connecting an
external key for CW operation. Refer to “Keys for
CW (PANEL and KEY)” {page 7} before using these
jacks.
The PADDLE jack mates with a 6.3 mm (1/4")
3-conductor plug for connecting a keyer paddle to the
internal electronic keyer. The KEY jack mates with a
3.5 mm (1/8") 2-conductor plug for connecting an
external key for CW operation. Refer to “Keys for
CW (PANEL and KEY)” {page 7} before using these
jacks.
i Plastic cover
If the EXT.SP jack, DATA connector and REMOTE
connector are not used, attach this cover to protect
the connectors from dust.
If the EXT.SP jack, DATA connector and REMOTE
connector are not used, attach this cover to protect
the connectors from dust.
TX/ RX UNIT
MIC
PANEL
PADDLE
KEY
EXT.SP
DATA
REMOTE
COM
q
w
e
r
t
y
u
i