Kenwood TK-2202 Manual Do Utilizador
10
BASIC OPERATIONS
1
Turn the Power switch/ Volume
control clockwise to switch the
transceiver power ON.
•
control clockwise to switch the
transceiver power ON.
•
A beep sounds if enabled by
your dealer.
your dealer.
2
Press the key programmed with
the Monitor or Squelch Off
function to hear background
noise, then rotate the Power
switch/ Volume control to adjust
the volume.
the Monitor or Squelch Off
function to hear background
noise, then rotate the Power
switch/ Volume control to adjust
the volume.
3
Rotate the Channel selector to
select your desired channel.
•
select your desired channel.
•
When you receive an
appropriate signal, you will
hear audio from the speaker.
appropriate signal, you will
hear audio from the speaker.
4
To make a call, press and hold
the PTT switch, then speak into
the microphone using your normal
speaking voice.
•
the PTT switch, then speak into
the microphone using your normal
speaking voice.
•
Hold the microphone
approximately 1.5 inches
(3 to 4 cm) from your lips.
approximately 1.5 inches
(3 to 4 cm) from your lips.
5
Release the PTT switch to
receive.
receive.
Note: When the battery pack voltage
becomes too low, transmission will stop
and an alert tone will sound. See “Low
Battery Warning” on page 19.
becomes too low, transmission will stop
and an alert tone will sound. See “Low
Battery Warning” on page 19.
1
1
1