Kenwood TK-3131 Manual Do Utilizador
32
1
Turn the transceiver power OFF.
2
Press and hold the MENU key while turning
the transceiver power ON (for 1 second).
the transceiver power ON (for 1 second).
3
Press the
▲ or ▼ key to select “ ”.
4
Press the MENU key to select “
” (beep
on) or “
” (beep off).
5
Press the PTT, MON, or CAL key to exit
Setting Mode.
Setting Mode.
S
IMPLEX
/ S
EMI
-D
UPLEX
O
PERATION
Simplex operation is simply transmitting and receiving between
two parties. This is how you normally operate the transceiver.
However, this transceiver is also capable of using semi-duplex
operation. In semi-duplex operation, you are able to access a
repeater, in order to transmit over longer distances. This can
be useful when a party member is out of range of normal
transmission. In order to use semi-duplex operation, a repeater
must be available in the area. Refer to the channel frequency
tables on pages 41 and 42 for the receive and transmit
frequencies when using simplex or semi-duplex operation.
two parties. This is how you normally operate the transceiver.
However, this transceiver is also capable of using semi-duplex
operation. In semi-duplex operation, you are able to access a
repeater, in order to transmit over longer distances. This can
be useful when a party member is out of range of normal
transmission. In order to use semi-duplex operation, a repeater
must be available in the area. Refer to the channel frequency
tables on pages 41 and 42 for the receive and transmit
frequencies when using simplex or semi-duplex operation.