Kenwood TK-8360. TK-7360H Manual Do Utilizador

4

In order for members of your own group to hear your call while you are using the 

scrambler, all members must activate their scrambler functions.
Press the key programmed as Scrambler to toggle the Scrambler function ON or 

OFF.

•  The   icon appears on the display while the Scrambler is activated.

When using an optional scrambler board, you can change the scrambler codes:
1

  Press and hold the key programmed as Scrambler for  second.

•  “CODE” appears on the display, followed by the current scrambler code.

  Press  /  (if the key assignment list selection is configured as “Enabled”) or 

/C> to select your desired scrambler code.

  Press S,  , or   to store the new setting.

•  After changing your scrambler code, be sure to inform all of your group members of 

the new code so they can also reset their transceivers.  The scrambler function will 

not work with transceivers set up with different scrambler codes.

You can use the key programmed as Monitor or Squelch Off to listen to weak 

signals that you cannot hear during normal operation and to adjust the volume 

when no signals are present on your selected channel.

•  The   icon appears on the display while Monitor or Squelch Off is activated.

Your dealer can program a key with one of four Monitor/Squelch Off functions:

•  Monitor:  Press to deactivate QT, DQT, DTMF, 2-tone, or FleetSync Signaling.  Press 

again to return to normal operation.

•  Monitor Momentary:  Press and hold to deactivate QT, DQT, DTMF, 2-tone, or 

FleetSync Signaling.  Release to return to normal operation.

•  Squelch Off:  Press to hear background noise.  Press again to return to normal 

operation.

•  Squelch Off Momentary:  Press and hold to hear background noise.  Release to return 

to normal operation.

n

  If a key has been programmed as Squelch Level, you can readjust your 

transceiver’s squelch level:
1

  Press the key programmed as Squelch Level.

•  The   icon appears on the display, along with the current squelch level.

  Press  /  (if the key assignment list selection is configured as “Enabled”) 

or <B/C> to select your desired squelch level from 0 to .

  Press S or   to store the new setting.