Kenwood TK-760G Manual Do Utilizador
48
TK-760G/762G
ADJUSTMENT
Adjustment Location
■ Switch (TK-760G)
■ Switch (TK-760G)
■ Adjustment Point
■ Note
• Flash memory
• Flash memory
The firmware program (User mode, Test mode, Tuning
mode, etc.) and the data programmed by the FPU (KPG-56D)
for the flash memory, is stored in memory. When parts are
changed, program the data again.
for the flash memory, is stored in memory. When parts are
changed, program the data again.
• EEPROM
The tuning data (Deviation, Squelch, etc.) for the
EEPROM, is stored in memory. When parts are changed,
readjust the transceiver.
readjust the transceiver.
■ Repair Jig
• Chassis
• Chassis
Use jig (Part No. : A10-4010-02) for repairing the TK-
760G/762G. The jig facilitates the voltage check when the
voltage on the component side TX-RX unit is checked during
repairs.
voltage on the component side TX-RX unit is checked during
repairs.
• Extension cable
Part No. : E30-3404-05
L13
L11
L18
L15
L5
IC5 9pin
RSSI
TX-RX UNIT (A/2)
PLL/VCO
TC106
CV
TC109
Power
LED
Volume
up/down
Display
Channel
up/down
MIC jack
Programmable function keys
Ax4
Ax5
Extension cable
Ax2
Bx2
A
ø2.6 x 6
B
M3 x 8