Kenwood TK-8150 Manual Do Utilizador

9

1 Select the desired trunking zone and a group ID.

2 Press and hold the PTT switch.

3 If the “Clear to Talk” tone sounds, communication is possible; start speaking

into the microphone.  Release the PTT switch to receive.

• For best sound quality at the receiving station, hold the microphone approximately

1.5 inches (3 ~ 4 cm) from your mouth.

4 When your conversation is finished, return the microphone to its hanger.

1 When a dispatch call is received, the transceiver will automatically change to

the correct channel and you will hear the call.

2 Readjust the volume as necessary.

Note:  You can only make a telephone call if the telephone service is available and you have an optional
keypad microphone.  Refer to “DTMF CALLS” on page 12.  Consult your dealer for further details.

1 Select the desired trunking zone and a group ID.

2 Press and hold the PTT switch for approximately 1 second to ensure a

connection.

• Confirm that there is a dial tone after releasing the PTT switch.

3 Dial using the microphone keypad.

• After dialling, wait for a response from the called party.

4 When the called party responds, press and hold the PTT switch and speak

into the microphone.  Release the PTT switch to receive.

• Only one person can speak at a time.

5 To end the call, press the # key or the key programmed as TEL Disconnect.

1 When a telephone call is received, the transceiver will automatically change to

the correct channel and you will hear the call.

2 To respond to the call, press and hold the PTT switch and speak into the

microphone.  Release the PTT switch to receive.

• Only one person can speak at a time.

3 To end the call, press the # key or the key programmed as TEL Disconnect.