Kenwood TK-7100 Manual Do Utilizador

13

1 Press the microphone

key.

• “ ” appears on the display.

2 Enter the desired memory location number (1 ~ 9).

• The digits stored in the selected location number appear on the display.

• To cancel, press any key other than the PTT switch.

3 Press the PTT switch.

• If programmed by your dealer, no DTMF tone will sound when “D” is transmitted.

“D” is used for a pause time.  The pause duration is programmed by your dealer.

1 Press the microphone # key.

• “ ” appears on the display.

2 Press the microphone # key again.

• “

” appears on the display.

• To cancel, press any key other than 1 ~ 9.

3 Enter the memory location number (1 ~ 9) you want to clear.

• The memory location number is cleared and the display returns to normal.

1 Press the microphone

key.

• “ ” appears on the display.

2 Press the microphone 0 key.

• The digits last dialled appear on the display.

• If there is no data in the redial memory, an error tone will sound.

• To cancel, press any key other than the PTT switch.

3 Press the PTT switch.

Note:  Switching the transceiver power OFF clears the redial memory.