Kenwood TK-5910 Manual Do Utilizador

7

Note:  Scan programming is only available when using Conventional operation.

■

  If Scan Type has been programmed for Conventional operation, you are able 

to reprogram your scan list.
1  Press the key programmed as Scan Program.

•  The 

 (KCH-4 ) or 

SCAN

 (KCH-5) icon appears on the display and blinks.

2  Press the GRP 

 and 

 keys or rotate the 

CH control to select the zone 

and channel you will add to or remove from the Scan list.

•  Press the 

PF 2 key to toggle between Zone Select and Channel Select.

3  Press the PF 4 key to add or remove the selected zone or channel to/ from 

the scan list.

•  The zone add indicator (KCH-4:  

/ KCH-5:  

)/  

channel add indicator (KCH-4:  

/ KCH-5:  

) will 

appear on the display when the selected channel is added to the scan sequence.

4  Press the PF 1 key to exit scan programming.

  If the Priority channel has been set as Operator Selectable by your dealer, you 

are able to reprogram the Priority mode as well.
1  Press the key programmed as Scan Program.

•  The 

 (KCH-4) or 

SCAN

 (KCH-5) icon appears on the display and blinks.

2  Press and hold the PF 3 key to edit the Priority channel.
3  Press the GRP 

 and 

 keys or rotate the 

CH control to select the 

channel you will set or unset as Priority.

4  Press the PF 4 key to toggle the selected channel between Priority and 

Normal.

•  “P”, “P”, or “PP” appears on the sub-display when Priority mode is selected.

5  Press the PF 3 key again to set the new channel setting.
6  Press the PF 1 key to exit scan programming.