Shakespeare Electronic 407 Folheto

Thank you for purchasing a Shakespeare antenna product.

Customer comments are welcome. Before installing, please study

the diagram and check parts supplied against those listed.

Important: Please read all instructions before installation!

The Style 407 Heavy Duty 4-Way Swivel Mount is a

versatile antenna mount made of chrome plated brass. Its four-

way swivel action permits easy lowering of the antenna to clear

overhead obstructions. The mount is not self-supporting and

must be used with a Shakespeare Style 408-R Standoff Bracket

(sold separately). Standard 1”-14 threads.

Tools required: Drill, drill bit for 1/4” wood or

sheet metal screws, screwdriverInstallation

Instructions

1. Choose a mounting location that is as high as possible, as free

as possible from obstructions, and as far as possible from

other antennas.

2. Using the mount’s base plate as a template, mark the locations

for the four mounting holes. Drill 1/4” mounting holes.

Note: When drilling fiberglass, use metal

drilling bits, not wood boring bits. If possible,

support the surface with a wooden backup pad

during drilling, to minimize push-through

damage.

3. Assemble the Swivel Mount by joining the two sections and

securing them with the hex-head bolt, lockwasher, and nut

(supplied). Note that this joint can be in one of two positions,

according to whether you’re mounting to a vertical or

horizontal surface.

4. Attach the mount assembly to the mounting surface using

machine screws, lockwashers, and nuts (sold separately). For

some types of surfaces, you might need to substitute stainless

steel woodscrews or other hardware.

5. Attach the antenna to the Swivel Mount, being careful not to

damage the antenna’s cabling, if any. Fit the antenna into your

upper support bracket (sold separately) and secure it.

IMPORTANT: If the thickness of the mounting

surface is not adequate to support the antenna

under expected stress, a wooden back-up pad

(not supplied) should be applied underneath the

mounting surface during installation.

Swivel

* Not supplied. For some types of mounting surfaces you

might need to substitute stainless steel woodscrews or other

hardware.

Supplied Parts

1 Mount Assembly

1 Mount Base Plate

1 3/8” Hex Head Bolt

1 3/8” Internal Tooth Lockwasher

1 3/8” Plain Washer

1 3/8” Hex Nut

1”-14 Thread

Mounting Hole

Mounting Screw*

Lockwasher*

Nut*

Bolt

Base Plate

Swivel

Mounting

Screw*

Lockwasher*

Nut*

Bulkhead Mounting: SIDE VIEW

Bulkhead

Mounting:

FRONT

VIEW

Deck Mounting: SIDE VIEW

Style 407

35-90-1

120-00

Shakespeare Electronic Products Group

U.S. Operations: 6111 Shakespeare Rd. · Columbia, SC 29223 · 803-227-1590 · Fax: 803-419-3099 · www.shakespeare-marine.com

U.K. Operations: Enterprise Way, Fleetwood, Lancashire, FY7

8RY, England · +44 (0) 1253 858787 · Fax: +44 (0) 1253-859595 · www.vtronix-antennas.com

Shakespeare is a subsidiary of Jarden Corporation (NYSE: JAH)