Vertex Standard FT-857 Manual Do Utilizador

KEY REV]. The default setting for this feature is “NORMAL,” whereby the “Tip” con-
nection on the Key Plug is “Dot” and the “Ring” connection is “Dash.” To change the
paddle polarity:

Ÿ Press and hold in the [FUNC] key for one second to enter the Menu mode.
Ÿ Rotate the SELECT knob to recall Menu Mode No-001 [EXT MENU], then rotate

the DIAL to change the setting to “ON” to enable the extended Menu Mode, if needed.

Ÿ Rotate the SELECT knob to select Menu Mode No-025 [CW KEY REV].
Ÿ Rotate the DIAL knob to select the new setting.
Ÿ When done, press and hold in the [FUNC] key for one second to save the new setting

and exit to normal operation.