Vertex Standard VM-3500E Manual Do Utilizador
Page 5
VM-3500E
List of the practicable area
AUT
BEL
DNK
FIN
FRA
DEU
GRC
ISL
IRL
ITA
LIE
LUX
NLD
NOR
PRT
ESP
SWE
CHE
GBR
4 INSTALLATION NOTE
The installation of this equipment should be made in such a manner as to
respect the EC recommended electromagnetic field exposure limits (1999/519/
EC).
respect the EC recommended electromagnetic field exposure limits (1999/519/
EC).
The maximum RF power available from this device is 25 watts. The antenna
should be installed as high as possible for maximum efficiency and that this
installation height should be at least 5 meters above ground (or accessible)
level. In the case where an antenna can not be installed at a reasonable height,
then the transmitter should neither be continuously operated for long periods if
any person is within 5 meters of the antenna, nor operated at all if any person is
touching the antenna.
should be installed as high as possible for maximum efficiency and that this
installation height should be at least 5 meters above ground (or accessible)
level. In the case where an antenna can not be installed at a reasonable height,
then the transmitter should neither be continuously operated for long periods if
any person is within 5 meters of the antenna, nor operated at all if any person is
touching the antenna.
In all cases any possible risk depends on the transmitter being activated for
long periods (actual recommendation limits are specified as an average of 6
minutes). Normally the transmitter is not active for long periods of time. Some
radio licenses will require that a timer circuit automatically cuts the transmitter
after 1 - 2 minutes etc.
long periods (actual recommendation limits are specified as an average of 6
minutes). Normally the transmitter is not active for long periods of time. Some
radio licenses will require that a timer circuit automatically cuts the transmitter
after 1 - 2 minutes etc.
Attention in Case of Use
This transceiver works on frequencies which are not generally permitted.
For frequency allocation, apply for a licence at
your local spectrum management authority.
your local spectrum management authority.
For actual usage contact your dealer or sales
shop in order to get your transceiver adjusted
to the allocated frequency range.
shop in order to get your transceiver adjusted
to the allocated frequency range.