Canon 2232B001AA Manual Do Utilizador

U

sers in the U

.S.A.

Users in the U.S.A.

Location
Supply a suitable table, cabinet, or desk. See p. 14-2 for the machine’s weight and dimensions.

Order Information
1.  Provide only a single-line to touch-tone or rotary telephone set terminated with a standard 4-pin 

modular phone plug. (Touch-tone is recommended if available in your area.)

2.  Order an CA11A modular jack (USOC code), which should be installed by the telephone company. If 

the CA11A jack is not present, installation cannot occur.

3.  Order a normal business line from your telephone company’s business representative. The line 

should be a regular voice grade line or equivalent. Use one line per machine.
DDD (DIRECT DISTANCE DIAL) LINE
-or-
IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE OVERSEAS

Canon recommends an individual line following industry standards, e.g., the 2500 (touch tone) or 500 
(rotary/pulse dial) telephones. A dedicated extension off a PBX machine without “Camp On” signals is also 
permissible with the machine. Key telephone systems are not recommended because they send non-standard 
signals to individual telephones for ringing and special codes, which may cause a fax error.

Power Requirements
The power outlet should be a three-prong grounded receptacle (Single or Duplex). It should be 
independent from copiers, heaters, air conditioners or any electric equipment that is thermostatically 
controlled. The rated value is 120 volts and 15 amperes. The CA11A modular jack should be relatively 
close to the power outlet to facilitate installation.