Canon 2232B001AA Manual Do Utilizador
![Canon](https://files.manualsbrain.com/attachments/4b6818c07b947b910f8cfb49338c2c63bdefaee1/common/fit/150/50/61ea34cb812b6780fe3b16f0b9221bd2f7635c65cee2473b66396d8b72cd/brand_logo.png)
Fax
5-64
Job Recall
Job Recall
You can recall the last three addresses, scan settings, and send settings which have been set
in the <Log>, and then send your documents.
in the <Log>, and then send your documents.
The settings such as destinations, scan settings and send settings are stored in a log. The actions below after you change
settings are not recorded in a log:
settings are not recorded in a log:
Pressing the (Start) or (Reset) or
(Main Menu).
Activation of the Auto Clear mode.
Turning OFF the machine.
Turning OFF the machine.
Identical send settings are stored only once in recall memory.
If <Restrict New Addresses> in <Restrict the Send Function> in <System Management Set.> under <Additional Func.> is
set to <On>, the addresses specified from the Address Book are only recalled.
The settings that were stored in memory are not erased even when the main power is turned OFF.
If <Restrict Sending From Log> in <Restrict the Send Function> in <System Management Set.> under <Additional Func.>
is set to <On>, you cannot specify a destination using the <Log>. (See “Security,” in the e-Manual.)
If <Restrict New Addresses> in <Restrict the Send Function> in <System Management Set.> under <Additional Func.> is
set to <On>, the addresses specified from the Address Book are only recalled.
The settings that were stored in memory are not erased even when the main power is turned OFF.
If <Restrict Sending From Log> in <Restrict the Send Function> in <System Management Set.> under <Additional Func.>
is set to <On>, you cannot specify a destination using the <Log>. (See “Security,” in the e-Manual.)
–
•
•
•
•
•
–
–
–
–
–
–
1
Place your originals.
2
Press
(Main Menu).
3
Use [
▼], [▲] or (Scroll Wheel) to select
<Send/FAX>, then press [OK].
4
Use [
▼], [▲] or (Scroll Wheel) to select
<Log>, then press [OK].
5
Use [
▼], [▲] or (Scroll Wheel) to select
<Mode 1>, <Mode 2> or <Mode 3>, then
press [OK].
You can check the recall settings by pressing the
left Any key to select <Details>.