Canon 2232B001AA Manual Do Utilizador

Error Messages

Troubleshooting

This message shows the percentage 
of the memory currently available. 
This message is displayed when 
you set the originals in the feeder in 
Fax/Send mode.

If you need more space, wait for the 
machine to send any documents in 
memory. Also print, send, or delete any 
documents stored in memory.

The IP address that the machine 
should connect to cannot be 
determined.

Check the DNS (Domain Name 
System) Server Settings in TCP/IPv4 
or v6 in Network Settings in System 
Management Set (from the Additional 
Functions screen).

You have specified the group 
addresses when the line is off the 
hook.

–

Specify the recipient other than group 
addresses.

–

You have specified the One-touch 
that has registered with other than 
fax number when the line is off 
the hook.

–

Make sure that the line is 
disconnected.

–

The registered group is 
already nested for three levels 
of subgroups (e.g., a group 
registered in a group in a group in 
a group).

–

You cannot register a group to contain 
more than three levels of subgroups. 
Modify the group so that it contains 
three levels of groups or less.

–

You selected the One-touch that 
has already been registered, 
when you are registering group 
addresses.
You selected group addresses that 
has already been registered, when 
you are registering a One-touch.

–

–

Register the One-touch that is not 
used.

–

The machine’s TCP/IP is not 
operating.

Check the IP Address Settings in Network 
Settings in System Management Set 
(from the Additional Functions screen). 
(See “Network Settings,” in the e-
Manual.)

The cover is open.

Check the cover and make sure that it is 
completely closed.