Panasonic UB-8325 Manual Do Utilizador

Turn on the Interactive Panaboard.

Turn on your computer and start up Windows.

For Windows 2000 / Windows XP
Connect the USB cable provided from the 
electronic board to the computer.
•The Interactive Panaboard Software is 

automatically started.

For WIndows 98 / Windows Me
Click [Start] and select Programs - 
Panasonic - Interactive Panaboard - 
Interactive Panaboard.
•The window appears to show the Interactive 

Panaboard is detected.

•If the Panaboard Operation Panel is 

displayed using the Panasonic-DMS, the 
Panasonic Interactive Software cannot be 
started. Close the Panaboard Operation 
Panel and start it. Refer to page 72.

•To change the setting so the Interactive 

Panaboard Software is not started 
automatically when connecting the USB 
cable, perfrom the following.

(1) Connect the USB cable provided from the 

electronic board to the computer.

(2) Click [Start] and select Settings - 

Control Panel, then double-click 
Scanners and Cameras icon. 
(For Windows XP, click [start] and select 
Control Panel)

(3) Double-click Panaboard-UB8 USB 

Device Driver icon and click the Disable 
device events check box in the Events 
tab. Click [OK].

To start the Interactive Panaboard Software, 
click [Start] and select Programs - 
Panasonic - Interactive Panaboard - 
Interactive Panaboard.
(For Windows® XP, All Programs instead of 
Programs)

Click [OK].

•The Select Mode window appears.

Click the Whiteboard icon and click [OK].
•The Whiteboard Window appears and the 

icon 

 is registered in the Taskbar.

•If the Interactive Panaboard is not detected, 

the notification window appears. In this case, 
check the status of the Interactive 
Panaboard and confirm that the USB cable is 
connected. For details on the settings of the 
communications port, refer to “Setting the 
Communication Port” on page 35.

•If the Interactive Panaboard Software is used 

without connecting the Interactive 
Panaboard, click [Offline] in the notification 
window. In the off-line state, a file recorded in 
the Whiteboard mode can be played back 
and edited.

•The tool tip text displayed when the mouse is 

located over the icon 

 in the Taskbar 

allows you to determine the current mode.
- Whiteboard mode: “Interactive Panaboard 

(Whiteboard)”

- Projector mode: “Interactive Panaboard 

(Projector)”

■ Exiting the Interactive Panaboard 

Right-click the icon 

 in the Taskbar and click Exit 

in the pop-up menu.

Right-click the icon 

 in the Taskbar to display the 

pop-up menu.
Following operations are possible in the pop-up menu.

Select Mode...: (see page 35)

Allows you to switch between modes 
(Projector mode / Whiteboard mode).

Open / Close Whiteboard Window:

Allows you to open or close the Whiteboard 
window by selecting this menu. This menu is 
alternately changed to open or close every 
selecting.

Settings:

Communication Port...: (see page 35)
Sets the communication port.
Adjustment...: (see page 36)
Adjusts the position of the Electronic Pen or 
the Electronic Eraser to improve the shifted 
position.
Options...: (see page 36)