Panasonic UB-8325 Manual Do Utilizador

The following table describes the meaning of each of the symbols which may flash in the Multi-Copy/Error Indicator.

If other indications appear, call your dealer.

Detection of the marker color of 
the Electronic Pen does not work 
well when the Whiteboard mode 
of the interactive function is used.

The marker for interactive (small) is not securely set.

Rotate the pen holder lever to the release position, and then 
return the pen holder lever to the lock position while inserting 
the marker until you hear a buzzing sound.

The proprietary marker for interactive (small) is not set into the pen 
holder.

Use the proprietary markers for interactive (small). 

The message "Low Battery" 
appears on the computer screen.

Replace batteries of the Electronic Pen or the Electronic Eraser 
which have “Low Battery” message displayed. 

25
77

(Error)

Data transfer error

Connect the USB cable securely.

(Screen)

The screen will not move.

Turn off the power and slowly move 
the screen by hand.

–

(door)

The printer door is not closed 
securely.

Close the printer door securely.

(Jam)

Paper jam

Open the printer door and remove 
the jammed paper.

(ribbon)

The thermal transfer film is slack, has 
run out or is not installed.

Remove the slack from the thermal 
transfer film, replace or install the 
thermal transfer film.

18
22

(Paper)

Out of paper

Load copy paper.

(Scanner Failure)

The scanner or screen is in strong 
sunlight or strong lighting.

Change the direction of the screen or 
block the light.

–