Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Panasonic
  4. UB-8325
  5. Manual Do Utilizador

Panasonic UB-8325 Manual Do Utilizador

Download
Página de 100
89
Inst
allation
Electronic Board Operations Check
After assembling the electronic board, perform the procedures presented in the following table to make sure it 
functions properly.
Step
Points to Check
Symptom
Solutions
1
Turn on the power switch.
“ ” flashes after “ ” lights up.
(Normal operation)
(If not)
Check power cord. (See step 
4 on page 88.)
2
Open the printer door and attach the 
accessory thermal transfer film, then 
close the printer door.
• Installing Thermal Transfer Film 
procedure (refer to the Operating 
Instructions on page 18)
“ ” flashes.
(Normal operation)
(If not)
Check thermal transfer film.
3
Open the paper cover and insert 
ordinary A4 (Letter) test paper, then 
close the paper cover.
• Loading Copy Paper procedure 
(refer to the Operating 
Instructions on page 19)
“ ” lights up.
(Normal operation)
(If not)
Check copy paper.
4
Open the printer door.
“ ” flashes.
(Normal operation)
(If not)
*
1
5
Close the printer door.
“ ” lights up.
(Normal operation)
(If not)
*
1
6
Press .
Screen is fed.
(Normal operation)
The screen film surface is not fed 
smoothly.
*
1
There are strange noises.
7
Use the accessory marker to draw 
a large 
 filling the entire 
copyable area of the screen film 
surface.
•Copyable area (refer to the 
Operating Instructions on page 
11)
Press  
twice.
Press .
“ ” lights up and three copies are 
made.
(Normal operation)
Three copies are not made.
*
1
The entire readable area is not 
printed.
There are strange noises or paper 
jams during the copying process.
Multiple sheets of paper are fed 
through at the same time.
8
Press 
 to move the screen 
film surface. Write letters, etc. with 
the marker.
Press  
once.
Press .
The Contrast/Remaining Film 
indicator light is turned on and one 
copy is made.
(Normal operation)
The Contrast/Remaining Film 
indicator light is not turned on.
*
1
The image is not copied properly.
There are strange markings on the 
copy sheet 
(e.g., stripes or lines).
9
Press  
once.
The Contrast/Remaining Film 
indicator light is turned off.
(Normal operation)
(If not)
*
1