Garmin 550C Manual Do Utilizador
echo 200, echo 300c, echo 500c, and echo 550c Owner’s Manual
13
Using the echo
Turning On the a-Scope
), select MENU > Setup > Sonar
Setup > A-Scope > On.
alarms
Setting the Shallow Water and Deep Water alarms
You can set an alarm to sound when the depth is shallower or deeper than a
specified value.
NOTE: Alarm settings are saved when the device is turned off.
1. From any page, select MENU > Setup > Alarms.
2. Select an option:
NOTE: Alarm settings are saved when the device is turned off.
1. From any page, select MENU > Setup > Alarms.
2. Select an option:
• To sound an alarm when the depth is shallower than the specified
depth, select Shallow Water > On.
• To sound an alarm when the depth is deeper than the specified depth,
select Deep Water > On.
) of the alarm setting.
4. Select ENTER to accept the value.
The alarm setting appears.
5. Select Done or Confirm.
Setting the Battery Voltage alarm
Setting the Battery Voltage alarm
You can set an alarm to sound when the battery reaches a specified low
voltage.
NOTE: Alarm settings are saved when the device is turned off.
1. From any page, select MENU > Setup > Alarms > Battery > On.
NOTE: Alarm settings are saved when the device is turned off.
1. From any page, select MENU > Setup > Alarms > Battery > On.
2. Enter the value of the alarm setting (
page i
).
3. Select ENTER to accept the value.
The alarm setting appears.
4. Select Done or Confirm.
Setting Fish alarms
Setting Fish alarms
You can set an alarm to sound when the device detects a suspended target.
NOTE: Alarm settings are saved when the device is turned off.
1. From any page, select MENU > Setup > Alarms > Fish.
2. Select an option:
NOTE: Alarm settings are saved when the device is turned off.
1. From any page, select MENU > Setup > Alarms > Fish.
2. Select an option:
• Select
to sound an alarm for all fish sizes.
• Select
to sound an alarm for medium and large fish only.
• Select
to sound an alarm for large fish only.
Setting the Water Temperature alarm
If the device is connected to a temperature transducer, you can set an alarm
to sound when the water temperature varies more than ± 2 °F (±.1.1 °C).
NOTE: Alarm settings are saved when the device is turned off.
1. From any page, select MENU > Setup > Alarms > Water Temperature
NOTE: Alarm settings are saved when the device is turned off.
1. From any page, select MENU > Setup > Alarms > Water Temperature
> On.
).
3. Select ENTER to accept the value.
The alarm setting appears.
4. Select Done or Confirm.