Planar 020-1229-03A Manual Do Utilizador
DHCP Network Setup
Planar UltraRes User Manual
80
Network Settings
DHCP Network Setup
1
Turn on the display.
2
Open the UltraRes Control tool and connect to the display.
3
Select the Info tab. The IP address is shown towards the bottom of the tab.
4
One of the following will occur:
• If the IP address is 192.168.12.12, then DHCP failed. Use the Static IP
• If the IP address is 192.168.12.12, then DHCP failed. Use the Static IP
Network Setup instructions in the following section.
Note: