Siemens M200D Manual Do Utilizador
Installation / connection
4.2 Connection
M200D AS-Interface Basic
Manual, 03/2009, A5E01668085-01
Manual, 03/2009, A5E01668085-01
63
Pin assignment
The following diagrams show examples of circuits (2 and 3-wire system):
2-wire system
3-wire system
Note
The supply voltage for the digital inputs is short-circuit proof. The current is limited to max.
The supply voltage for the digital inputs is short-circuit proof. The current is limited to max.
200 mA. If a short-circuit or overload situation occurs in the sensor supply, the contact block
(motor) and brake output are shut down and a group fault is output. You must acknowledge
this fault with a trip reset.
4.2.6.2
Digital output
The motor starter is equipped with a digital output, which you can connect directly to an
actuator. The output is active when a group fault is present.
The output can be loaded to max. 0.5 A and protected electronically against short-circuits.
A connector (M12, 4 or 5 pin) is used for establishing the connection. The motor starter is
The output can be loaded to max. 0.5 A and protected electronically against short-circuits.
A connector (M12, 4 or 5 pin) is used for establishing the connection. The motor starter is
equipped with a range of sockets.
Example: Connecting the digital output